Free standard shipping and returns on all orders

Speed, Power, Performance – Only at RC Adventures LLC!

Your cart

Your cart is empty

BeeKeeper XT30 ESC

Regular price $89.00
Unit price
per 
Shipping calculated at checkout.

    • Description

       The XT30 BeeKeeper is an AM32 based brushless esc that is silent. It comes with 2 jst power leads for direct-power applications. It has an internal BEC to run low power shift servos, lights, etc.. from the receiver. These will come pre-programmed with optional waterproofing, if requested.

      The BeeKeeper is meant for low geared crawlers. It can not be used for bashers or high-power applications. It works best with 10pole to 14-pole motors. Any 1/10th scale or smaller truck from 1lb to 20lb is fine with proper gearing. The heavier the truck, the lower the gearing required. When using high KV motors from 2500kv 14-pole, up to 3500kv 10-pole, make certain to gear as low as possible. 2 speed trucks should use lower KV motors due to the taller 2ond gear.

       

      Waterproofing: Upon request we will waterproof the ESC. When waterproofed it is completely submersible. We use a dipping process that is then heat treated, with Infrared, to cure. The creates a more robust waterproofing.

       

      Optional USB programmer: USB link.

      These are waterproofed! 

      Specs:

      Dimensions: 37mm long x 25mm wide x 7mm tall

      Weight: 34.3g with leads, wires, plug

      Battery connector: XT30

      Motor connectors: 4mm bullets

      Voltage: 7.2-14.8 (2s-4s)

      BEC: 6V/3A

      Rated Current: 30amps continuous/40amps for 10sec

      10-pole: 500kv-3500kv

      14-pole: 500kv-2500kv

      Suggested gearing: 50:1 or lower(70:1)

       

      * Low voltage protection

      * RPM lock

      * Auto cell detection

      * Thermal protection

      * Am32 firmware

      * 1 year warranty

    Description

     The XT30 BeeKeeper is an AM32 based brushless esc that is silent. It comes with 2 jst power leads for direct-power applications. It has an internal BEC to run low power shift servos, lights, etc.. from the receiver. These will come pre-programmed with optional waterproofing, if requested.

    The BeeKeeper is meant for low geared crawlers. It can not be used for bashers or high-power applications. It works best with 10pole to 14-pole motors. Any 1/10th scale or smaller truck from 1lb to 20lb is fine with proper gearing. The heavier the truck, the lower the gearing required. When using high KV motors from 2500kv 14-pole, up to 3500kv 10-pole, make certain to gear as low as possible. 2 speed trucks should use lower KV motors due to the taller 2ond gear.

     

    Waterproofing: Upon request we will waterproof the ESC. When waterproofed it is completely submersible. We use a dipping process that is then heat treated, with Infrared, to cure. The creates a more robust waterproofing.

     

    Optional USB programmer: USB link.

    These are waterproofed! 

    Specs:

    Dimensions: 37mm long x 25mm wide x 7mm tall

    Weight: 34.3g with leads, wires, plug

    Battery connector: XT30

    Motor connectors: 4mm bullets

    Voltage: 7.2-14.8 (2s-4s)

    BEC: 6V/3A

    Rated Current: 30amps continuous/40amps for 10sec

    10-pole: 500kv-3500kv

    14-pole: 500kv-2500kv

    Suggested gearing: 50:1 or lower(70:1)

     

    * Low voltage protection

    * RPM lock

    * Auto cell detection

    * Thermal protection

    * Am32 firmware

    * 1 year warranty