Speed, Power, Performance – Only at RC Adventures LLC!

Your cart

Your cart is empty

INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4M

Regular price $80.00
Unit price
per 
Shipping calculated at checkout.

    • Description

      INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4M
      Note:

      • Not compatible with stock TRX4M chassis as the lay lown servo mount is wider than stock. Compatible with INJORA Universal chassis
      • Not compatible with original TRX4M size dogbone shafts as the axle housings are 4mm extended per side.
      • Compatible with both INJORA and stock TRX4M upgrade parts: gears, C hubs, steering knuckles, chassis links, drive shafts.
      • Only compatible with these servos: Stock TRX4M servo, INJORA 7kg servo INJS2065 (please use the bushings), INJORA 11kg servo INJS11

      Features:

      • Diamond shaped pumpkin for more realistic scale look.
      • Equipped with a servo-on-axle lay down servo mount that lowers the center of gravity.
      • 2 short drag links optional
      • Pre-assembled complete axles. Please grease the axles before installation.
      • +4mm axles increase the width of each side by 4mm, increase total length by 8 mm.
      • The entire axles have been extended, not just the dogbone shafts, which prevents the dogbone shafts from being overburdened.
      • 4mm extended desgin provides better stability and climbing performance
      • Come with Hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.

      Specifications:

      • Housing Material: Aluminum
      • Gear Material: 20CrMo Alloy Steel
      • CVD Shaft Material: Hardened Steel
      • Gear Ratio: 24/12=2:1 (Same as Stock)
      • Total Length: 122mm (4.80in)
      • Front Axle Weight: 62g (2.19oz)
      • Rear Axle Weight: 42g (1.48oz)

    Description

    INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4M
    Note:

    • Not compatible with stock TRX4M chassis as the lay lown servo mount is wider than stock. Compatible with INJORA Universal chassis
    • Not compatible with original TRX4M size dogbone shafts as the axle housings are 4mm extended per side.
    • Compatible with both INJORA and stock TRX4M upgrade parts: gears, C hubs, steering knuckles, chassis links, drive shafts.
    • Only compatible with these servos: Stock TRX4M servo, INJORA 7kg servo INJS2065 (please use the bushings), INJORA 11kg servo INJS11

    Features:

    • Diamond shaped pumpkin for more realistic scale look.
    • Equipped with a servo-on-axle lay down servo mount that lowers the center of gravity.
    • 2 short drag links optional
    • Pre-assembled complete axles. Please grease the axles before installation.
    • +4mm axles increase the width of each side by 4mm, increase total length by 8 mm.
    • The entire axles have been extended, not just the dogbone shafts, which prevents the dogbone shafts from being overburdened.
    • 4mm extended desgin provides better stability and climbing performance
    • Come with Hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.

    Specifications:

    • Housing Material: Aluminum
    • Gear Material: 20CrMo Alloy Steel
    • CVD Shaft Material: Hardened Steel
    • Gear Ratio: 24/12=2:1 (Same as Stock)
    • Total Length: 122mm (4.80in)
    • Front Axle Weight: 62g (2.19oz)
    • Rear Axle Weight: 42g (1.48oz)